WHAT IS THE WOLVERINE ENGINE OIL HEATER?
A revolutionary new kind of Engine Preheater designed with aerospace technology to heat the important areas of the auto engine beginning with its oil supply. Remember - Heat Rises.
WHAT DO CSA CE AND UL CERTIFICATIONS MEAN?
For consumers, Certification marks provide increased assurance of quality and safety.
CSA International certification marks indicate that our products have been tested and certified to the Canadian standards for consumer safety and environmental requirements.
CE marking certifies that our products meet European consumer safety and environmental requirements.
UL marking certifies that our products meet USA standards for consumer safety and environmental requirements.
WHAT DOES THIS ENGINE HEATER LOOK LIKE?
A thin, flexible, very durable silicone pad built to conform to the bottom or side of an engine oil pan.
HOW IS THIS ENGINE OIL HEATER INSTALLED?
It is bonded with a Peel-n-Stick aerospace adhesive to the bottom outside surface of an engine's oil pan.
HOW DOES THIS ENGINE HEATER WORK?
Heat generated is transferred into the oil pan structure to provide a thorough, gentle, even Heating of the oil supply. The heat then rises to warm important internal automobile engine components.
WHAT WILL THIS ENGINE HEATER DO FOR MY ENGINE?
IMPROVES crankability in the coldest weather.
REDUCES cold startup wear.
REDUCES water and acid accumulation in the oil supply.
PROVIDES immediate Lubrication.
WHY IS THERE NO MAINTENANCE REQUIRED ON THIS ENGINE OIL HEATER?
Wolverine Heater's space age technology does not suffer the costly element failure common to block type heaters, hot magnets and dip stick heaters.
HOW WILL THIS ENGINE HEATER SAVE ME MONEY?
The Wolverine Engine Oil Heater SAVES MONEY by increasing auto engine life. warm engines and less warm up time uses less fuel. It is maintenance free. Wolverine Heaters offer superior preheating at reduced electrical cost.
Increase auto engine life.
Reduces idle warm up time thus uses less fuel.
Reduce electrical cost.
The table shows how to select the correct heater based on capacity.
3.5 in. x 1.25 in (3.175 x 8.9 cm)
1-3 U.S. Qts. (.95 - 1.9 Liters)
3 in. round diameter (7.5 cm)
3-6 U.S. Qts. (2.85 - 5.7 Liters)
6 in. x 1.5 in (3.75 x 15 cm)
3-6 U.S. Qts. (2.85 - 5.70 Liters)
3.75 in. x 4.25 in. (10 x 11.5 cm)
5-13 U.S. Qts. (4.7 - 12.3 Liters)
5 in. x 7 in (12.75 x 17.75 cm)
13-27 U.S. Qts. (12.3 - 25.5 Liters)
6 in. x 11.75 in (15.25 x 30.50 cm)
26-48 U.S. Qts. (24.6 - 45.4 Liters)
IPH 500 In pan heater
10.75 x .75 in diameter (27.30 X 1.90 cm)
26 - 48 U.S. Qts. (24.6 - 45.4 Liters)
8.5 x 5.5in (21.59 X 13.97 cm)
FH 50 Auto Fuel Heater
9 x 3 in (22.86 X 7.62 cm)
Filter housing diameter: Minimum 2.75 in 6.98 cm. Maximum 3.75 in. 9.52 cm.
FH 100 Heavy Duty Fuel Heater
12 x 4 in (30.48 X 10.16 cm)
Filter housing diameter: Minimum 3.5 in (8.89 cm) Maximum 4.75 in (12.06 cm)